APC Back-UPS Pro uninterruptible power supply (UPS) Line-Interactive 1.5 kVA 865 W 10 AC outlet(s)
€590.31 Tax included
Codice Articolo: 586081
New product
Garanzia Italia 2 Anni
APC Back-UPS Pro, Line-Interactive, 1.5 kVA, 865 W, Sine, 156 V, 300 V
Green mode
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Power-saving outlets
Automatically cuts power to idle equipment to conserve electricity.
Resettable circuit breaker
Easy recovery from overloads; no need to replace a fuse.
Extendable Run Time
Additional batteries can be added to provide power to the load for an extended period of time in the event of utility supply failure.
Battery-protected and surge-only outlets
Reserves power capacity and run time for connected equipment that require battery back-up while providing surge only protection for less critical equipment
Cold-start capable
Provides temporary battery power when the utility power is out.
Serial Connectivity
Use any Home Automation network to monitor and control the S20 through its RS-232 serial port. For information on how to communicate with the S20, see APC's Application Note #102. Crestron and AMX installers should visit their respective websites for information on how to integrate the S20 into those networks.
Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Disconnected battery notification
Warns when a battery is not available to provide backup power.
Dataline Surge Protection
Provides protection of connected equipment from power surges on the data lines.
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Adjustable voltage-transfer points
Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
APC Back-UPS Pro. UPS topology: Line-Interactive, Output power capacity: 1.5 kVA, Output power: 865 W. AC outlet types: C13 coupler, Power plug: C14 coupler, AC outlets quantity: 10 AC outlet(s). Battery technology: Sealed Lead Acid (VRLA), Battery capacity: 187 VAh, Typical backup time at full load: 3.7 min. Product colour: Black, Display type: LCD, Certification: A-tick, C-tick, CE, GOST, GS Mark, Telepermit, TUV, REACH, PEP, EOLI, NEMKO-GS. Width: 112 mm, Depth: 380 mm, Height: 301 mm
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Power-saving outlets
Automatically cuts power to idle equipment to conserve electricity.
Resettable circuit breaker
Easy recovery from overloads; no need to replace a fuse.
Extendable Run Time
Additional batteries can be added to provide power to the load for an extended period of time in the event of utility supply failure.
Battery-protected and surge-only outlets
Reserves power capacity and run time for connected equipment that require battery back-up while providing surge only protection for less critical equipment
Cold-start capable
Provides temporary battery power when the utility power is out.
Serial Connectivity
Use any Home Automation network to monitor and control the S20 through its RS-232 serial port. For information on how to communicate with the S20, see APC's Application Note #102. Crestron and AMX installers should visit their respective websites for information on how to integrate the S20 into those networks.
Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Disconnected battery notification
Warns when a battery is not available to provide backup power.
Dataline Surge Protection
Provides protection of connected equipment from power surges on the data lines.
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Adjustable voltage-transfer points
Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
APC Back-UPS Pro. UPS topology: Line-Interactive, Output power capacity: 1.5 kVA, Output power: 865 W. AC outlet types: C13 coupler, Power plug: C14 coupler, AC outlets quantity: 10 AC outlet(s). Battery technology: Sealed Lead Acid (VRLA), Battery capacity: 187 VAh, Typical backup time at full load: 3.7 min. Product colour: Black, Display type: LCD, Certification: A-tick, C-tick, CE, GOST, GS Mark, Telepermit, TUV, REACH, PEP, EOLI, NEMKO-GS. Width: 112 mm, Depth: 380 mm, Height: 301 mm
Features | |
UPS topology | Line-Interactive |
Output power capacity | 1.5 kVA |
Output power | 865 W |
Waveform | Sine |
Input operation voltage (min) | 156 V |
Input operation voltage (max) | 300 V |
Input frequency | 50/60 Hz |
Output frequency regulation | 50/60 Hz |
Automatic Voltage Regulation (AVR) | Y |
Surge energy rating | 441 J |
Hold time (max) | 12 ms |
Efficiency | 98.9% |
Crest factor | 3:1 |
Noise level | 45 dB |
Surge protection | Y |
Surge protection features | Digital Subscriber Line (DSL), Fax, Modem, Network, Telephone |
Audible alarm(s) | Y |
Audible alarm modes | Low battery alarm, Overload alarm |
Ports & interfaces | |
AC outlet types | C13 coupler |
Power plug | C14 coupler |
AC outlets quantity | 10 AC outlet(s) |
Number of output IEC jumpers | 2 |
USB port | Y |
Battery | |
Battery technology | Sealed Lead Acid (VRLA) |
Battery capacity | 187 VAh |
Typical backup time at full load | 3.7 min |
Typical backup time at half load | 12.4 min |
Battery life (max) | 5 year(s) |
Battery recharge time | 8 h |
Hot-swap battery | Y |
Automatic battery test | Y |
Cold start | Y |
Replacement battery cartridge | APCRBC124 |
Design | |
Product colour | Black |
Display type | LCD |
Certification | A-tick, C-tick, CE, GOST, GS Mark, Telepermit, TUV, REACH, PEP, EOLI, NEMKO-GS |
Operational conditions | |
Operating temperature (T-T) | 0 - 40 °C |
Storage temperature (T-T) | -15 - 40 °C |
Operating relative humidity (H-H) | 0 - 95% |
Storage relative humidity (H-H) | 0 - 95% |
Operating altitude | 0 - 9000 m |
Non-operating altitude | 0 - 15000 m |
Weight & dimensions | |
Width | 112 mm |
Depth | 380 mm |
Height | 301 mm |
Weight | 12.7 kg |
Package width | 238 mm |
Package depth | 488 mm |
Package height | 387 mm |
Package weight | 14.3 kg |
Packaging data | |
Cables included | Phone (RJ-11), USB cable |
Manual | Y |
Software CD | Y |
Bundled software | PowerChute Personal Edition |
Logistics data | |
Products per pallet | 20 pc(s) |
Harmonized System (HS) code | 85078000 |
Products per master (outer) case | 1 pc(s) |
Other features | |
Nominal input voltage | 230 V |
Packaging content | 1x Detachable IEC Power Cord |
- Name : 30 day return policy
- Description
Your RMA request has been submitted. We will pick up the item you wish to return within 6 days. We hope you understand that we only accept items for return if they have not been used or tampered with. Original packaging and accessories also need to be returned along with item.
Click here to get more details